Archive / Frames, Casters, Legs & Corners for Instrument Amp

RSS feed for this section

Ernie Ball Amp Caster Standard Plate Mount Set of 4 #9923gg

Ernie Ball Amp Caster Standard Plate Mount Set of 4Set of 4 casters, standard plate mount. 2″ diameter x 7/8″ Ruberex wheel, double ball bearing, split level, nickel plated steel construction offers superior swiveling and weight dispersion. Each caster comes complete with four #14-1 (1/4″) round head phillips wood mounting screws. Maximum recommended weight is 70 lbs per caster. Set of 4 castersStandard plate mount2″ diameter x 7/8″ Ruberex wheels double ball bearing, split level Nickel plated steel construction Each caster comes with phillips wood mounting screws70 lb. maximum recommended weight per caster.
Ernie Ball 585815 – Ernie Ball Amp Caster Standard Plate Mount Set of 4 – musical instruments

Check Best Price: “Ernie Ball Amp Caster Standard Plate Mount Set of 4″…

Fender 14″ Tilt Leg Kit #6886oq

Fender 14If your ears were attached to your knees, your amp would sound better, but since they usually are located on the sides of your head, Fender has Tilt-back Legs! Secured to the sides of your amp cabinet, these legs allow you to tilt your amp back so you can hear what you’re doing!
Fender 454512 – Fender 14″ Tilt Leg Kit – musical instruments

Check Best Price: “Fender 14” Tilt Leg Kit”…

Ernie Ball 6106 Amp Corners with Lips #4851hj

Ernie Ball 6106 Amp Corners with LipsErnie Ball 6106 Amp Corners with Lips give you a set of four corners with two-screw holes and lips. For amplifiers and cabinets with solid backs. Nickel-plated steel corner is designed for 3/4″ wood cabinets where rear panel can be removed. Each corner comes complete with 2 – 8 x 3/4″ Phillips-head wood screws. Internal radius of 10mm or 3/8″. Set of 42-screw mount with lipFor 3/4″ wood cabs and amps with solid backsNickel-plated steelIncludes 2 – 8 x 3/4″ Phillips-head wood screws per cornerInternal radius of 10mm or 3/8″
Ernie Ball 367270 – Ernie Ball 6106 Amp Corners with Lips – musical instruments

Check Best Price: “Ernie Ball 6106 Amp Corners with Lips”…

Ernie Ball Pop Out Amp Caster Set 4 Pack #4893cm

Ernie Ball Pop Out Amp Caster Set 4 PackThis is a set of 4 Ernie Ball pop-out, socket-mounted casters, measuring 2″ in diameter with a 7/8″ Rubberex wheel. Double ball bearing, split-level, nickel-plated steel construction offers superior swiveling and weight dispersion. The casters’ friction grip stem is precision-formed and securely shanked to prevent wobbling. Each caster comes complete with amp cabinet receptacle and four 14-1 round phillips head wood mounting screws. Installation requires drilling a 5/8″ hole in amp cabinet. The maximum recommended weight is 80lb. per caster. 2″ diameter x 7/8″ Rubberex wheelDouble ball bearing, split-level, nickel-plated steel constructionAmp cabinet receptacles included14-1 round Phillips wood-mounting screwsMaximum recommended weight: 80 lb. per caster
Ernie Ball 483501.288 – Ernie Ball Pop Out Amp Caster Set 4 Pack – musical instruments

Check Best Price: “Ernie Ball Pop Out Amp Caster Set 4 Pack”…

Fender 16″ Tilt-Back Amp Legs Kit #8049of

Fender 16Designed for the Fender Twin, Fender ’65 Twin Reverb, Fender ’94 Twin Amp, Fender ’63 Vibroverb, Fender Custom Vibrolux and Fender Tone Master 2-12 Guitar Amplifiers.2 X 16″ legs with mounting hardware.Fender Part: 099-0712-000
Fender H74383 – Fender 16″ Tilt-Back Amp Legs Kit – musical instruments

Check Best Price: “Fender 16” Tilt-Back Amp Legs Kit”…

Vox amPlug Night Train Guitar Headphone Amp #1269jr

Vox amPlug Night Train Guitar Headphone AmpNeed a few minutes alone with your tone? Your amPlug is ready. Up all night working on ideas? Killing time on the tour bus? amPlug is there. Want to polish your solo before that big gig? Don’t want to hear the other kids in study hall? amPlug is your answer. All-new analog modeling techniques endow amPlug with no-sacrifice sound satisfaction. Experience the modern high-gain tone – complete with Thick/Bright modes – of the VOX Night Train with the amPlug Night Train. A pair of AAA alkalines will keep you alone with your tone for up to twenty hours.The amPlug Night Train perfectly simulates the high-gain sound of the compact VOX Night Train tube amp. Just as with the actual Night Train head, you can switch between the two preamp sounds. The BRIGHT position boosts the high-frequency range; the THICK position offers a chunkier, heavier sound. The emulated speaker cabinet circuit accurately recreates the sound of the Night Train amp being played through the matching V112NT single 12″ Night Train speaker cabinet. As a finishing touch, the amPlug Night Train shares some of the cool looks of its namesake amplifier. Controls: Gain, Tone, Volume; STANDBY/ON/FX switchTerminals: PHONES Jack (stereo), AUX In Jack (stereo)Power supply: AAA batteries (x 2)Battery life: With zinc-carbon batteries: approximately 9 hours, with alkaline batteries: approximately 24 hoursDimensions (WxDxH): 86mm x 80mm x 31mm/3.39″ x 3.15″ x 1.22″Weight: 40 g/1.41 oz. (not including batteries)Included items: AAA batteries (X2) (for verifying operation)
Vox J14923 – Vox amPlug Night Train Guitar Headphone Amp – musical instruments

Check Best Price: “Vox amPlug Night Train Guitar Headphone Amp”…